Impala V8-5.3L VIN C (2006)
22. If replacing the positive and negative battery cable, perform the following:
1. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
2. Squeeze the battery cable branches together.
3. Slide the battery current sensor (1) off of the battery cable.
IMPORTANT: Note the position of the battery current sensor prior to removal.
INSTALLATION PROCEDURE
1. If the positive and negative battery cable was replaced, perform the following:
1. Slide the battery current sensor (1) onto the battery cable.
2. Using NEW tie straps and electrical tape, attach the battery current sensor to the battery cable.
IMPORTANT: Ensure that the tape tab is pointing away from the negative cable terminal.