Impala V8-5.3L VIN C (2006)
Steering Angle Sensor: Service and Repair
Steering Wheel Position Sensor or Steering Shaft Lower Bearing Replacement
Steering Wheel Position Sensor or Steering Shaft Lower Bearing Replacement
Removal Procedure
1. Caution:
Refer to Restraint System Caution in Service Precautions.
Disable the SIR system. Refer to Restraint System Disabling and Enabling Zone 3.
2. Remove the steering column from the vehicle.
3. Remove the following from the steering shaft:
1
The boot seal (5)
2
The steering shaft seal (4)
3
The sensor retainer (3)
4
The sensor locator (2)
4. Remove the steering wheel position sensor (1).
5. Remove the adapter and bearing assembly from the steering jacket assembly.
Installation Procedure
1. Install the adapter and bearing assembly to the steering jacket assembly.
