Impala V8-5.3L VIN C (2006)
4. Connect the rear wheel spindle rods to the knuckle.
5. Install the bearing/hub assembly.
6. Notice:
Refer to Fastener Notice in Service Precautions.
Tighten the strut to knuckle bolts (2) and nuts (1).
Tighten bolts to 120 Nm (89 ft. lbs.).
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Inspect the rear wheel alignment, adjust if necessary. Refer to Measuring Wheel Alignment.
