Impala V8-5.3L VIN C (2006)
7. Pull back the carpet from the front lower right/passenger door pillar to expose the interior fuse center (1). Refer to Junction Block Replacement -
Accessory Wiring.
8. Remove the cover then locate and remove the Air Bag Fuse from the interior fuse center.
9. Remove the right/passenger outer trim cover from the instrument panel (I/P) (3).
10. Remove the connector position assurance (CPA) from the I/P module connector (1).
11. Disconnect the I/P module connector (1) from the vehicle harness connector (2).
