K 1500 Suburban 4WD V8-4.8L VIN V (2003)
7. Move both front seats to the fully forward.
8. Install both rear console side panel screws (2).
Tighten
Tighten the retaining screws to 2 N.m (18 lb in).
9. Reposition the inboard seat track trim (1).
10. Connect the audio amplifier electrical connectors.
11. Connect the floor console electrical connector.
12. Install the center console end panel.
13. Install the console storage bin.
14. Install the cupholder to the console.
15. Install the upper console bezel.
16. Install the radio amp fuse.
17. If the amplifier has been replaced, perform the audio amplifier set up procedure for the BOSE(TM) amplifier ONLY. Refer to Audio Amplifier
Setup.
