chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Bezel Replacement|Page 21873 > < Bezel Replacement|Page 21871
Page 2
background image

1. Connect the electrical connectors.
2. Carefully align the panel, and slide the panel into the retainer slots in order to install the trim panel to the door. 

Notice: Refer to Fastener Notice in the Preface section.

3. Install the trim panel screws (2,3). 

Tighten
Tighten the trim panel screws (2,3) to 2 N.m (18 lb in).

4. Install the manual lock lever to the trim panel.

^ Align the manual lock lever to the opening in the door trim panel.
^ Push inward until the manual lock lever is fully seated into the trim panel.

5. Install the door trim panel upper extension.
6. Install the door handle bezel. 

Trim Panel Replacement - Upper Extension

Trim Panel Replacement - Upper Extension

Removal Procedure

1. Open the front door.

2. Release the upper extension by pulling outward in order to release the upper retainer clip.
3. Remove the upper extension from the trim panel by lifting up and out.

Installation Procedure

Bezel Replacement|Page 21873 > < Bezel Replacement|Page 21871