K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Tighten the bolts to 25 N.m (18 lb ft).
11. Position the rear body opening lower filler and MIG weld in place at factory weld locations.
12. Clean and prepare all weld surfaces.
13. Refinish the metal surfaces as necessary.
14. Align and install all of the related panels and the components.
Hinge Replacement - Rear Cargo Door - Upper Body Side
Hinge Replacement - Rear Cargo Door - Upper Body Side
Removal Procedure
1. Visually inspect and restore as much of the damage as possible to factory specifications.
2. Remove all of the related panels and the components.
3. Remove any excess sealer surrounding the hinge.
4. Scribe the location of the hinge on the hinge pillar.