chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 22519 > < Disabling and Enabling|Page 22517
Page 5
background image

11. Remove the CPA from the LF side impact module yellow 2-way connector (1) located under the driver seat.
12. Disconnect the LF side impact module yellow 2-way connector (1).

Zone 9

1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Service Precautions before disabling the SIR system.

2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Remove the SIR fuse from the fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the connector position assurance (CPA) from the RF side impact module yellow 2-way connector (1) located under the passenger seat.
6. Disconnect the RF side impact module yellow 2-way connector (1).

Disabling and Enabling|Page 22519 > < Disabling and Enabling|Page 22517