K 1500 Suburban 4WD V8-4.8L VIN V (2003)
1. Open the liftgate window.
2. Remove the push pin retainers from the garnish molding.
3. Pry gently with a thin-bladed tool in order to release the retaining clips.
4. Remove the garnish molding.
Installation Procedure
1. Install the garnish molding to the door.
2. Press on the garnish molding in order to engage the retaining clips.
3. Install the push pin retainers into the garnish molding.
4. Close the liftgate window.
Garnish Molding Replacement - Rear Corner
Garnish Molding Replacement - Rear Corner
Removal Procedure
1. Remove the rear upper garnish molding.
2. Pull down on the upper corners of the garnish molding in order to disengage the retaining clips.
3. Pull in order to disengage the remaining retaining clips.
4. Remove the rear corner garnish molding from the vehicle.
5. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
