chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Utility Storage Compartment > < Garnish Molding Replacement|Page 22598
Page 19
background image

1. Remove the rear door sill trim plate.
2. Remove the lower rear seat belt cover and bolt.
3. Remove the trim panel from the vehicle.

Installation Procedure

1. Install the body side lower trim panel to the vehicle.

Notice:  Refer to Fastener Notice in Service Precautions.

2. Install the lower seat belt bolt.

Tighten the bolt to 70 N.m (52 lb ft).

3. Install the seat belt cover.
4. Install the rear door sill trim plate.

Utility Storage Compartment > < Garnish Molding Replacement|Page 22598