K 1500 Suburban 4WD V8-4.8L VIN V (2003)
9. Install the park brake cable to the equalizer bar by pulling down on the cable in front of the equalizer and installing the cable to the equalizer bar.
10. Remove the safety stands.
11. Lower the vehicle.
12. Adjust the park brake cable. Refer toPark Brake Adjustment .
Right Rear - W/NYS
Park Brake Cable Replacement - Right Rear (with RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
3. Remove the park brake cable from the equalizer by pulling down on the intermediate cable and release the cable from the equalizer bar.
4. Remove the cable from the mounting bracket by depressing the locking tabs.
