K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Important: After installing the cable to the rear axle holding clip, verify that clip is securely retaining the cable. If not, crimp the clip by hand taking
care not to pinch or kink the cable.
11. Install the cable to the differential clip.
12. Install the park brake cable to the equalizer bar by pulling down on the cable in front of the equalizer and installing the cable to the equalizer bar.
13. Remove the safety stands.
14. Lower the vehicle.
15. Adjust the park brake cable. Refer toPark Brake Adjustment .
