chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Coolant Reservoir > < Surge Tank Hose/Pipe Replacement - Inlet|Page 7070
Page 6
background image

10. Install the air cleaner outlet duct.

11. Align the arrow at the throttle body end of the duct with the throttle body attaching stud.

Notice:

Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice

12. Tighten the air cleaner outlet duct clamps at the following locations:

-

Throttle body

-

MAF/IAT sensor
Tighten the clamps to 7 Nm (62 inch lbs.). 

13. Fill the cooling system.

Coolant Reservoir > < Surge Tank Hose/Pipe Replacement - Inlet|Page 7070