K 1500 Suburban 4WD V8-4.8L VIN V (2003)
5. Remove the fan clutch bolts from the rear of the fan blade, if necessary.
6. Separate the fan clutch from the fan blade.
Installation Procedure
Caution:
Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced
cooling fan could fly apart causing personal injury and property damage.
1. Install the fan clutch bolts.
2. Install the fan clutch onto the fan blade, if necessary.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
3. Install the fan clutch bolts.
Tighten the bolts to 23 Nm (17 ft. lbs.).
4. Install the fan blade.
