K 1500 Suburban 4WD V8-4.8L VIN V (2003)
1. If equipped with a 8.1 L engine. perform the following:
1.1.
Remove the oil cooler hose assembly.
1.2.
Connect the quick connect fittings (1) at the engine.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
1.3.
Install the oil cooler hose bracket bolt.
Tighten the bolt to 50 Nm (37 ft. lbs.).
2. If equipped with a 6.0L engine, perform the following:
2.1.
Install the oil cooler hose assembly and a new gasket.
2.2.
Install the oil cooler hose adapter bolts (2).
Tighten the bolts to 12 Nm (106 inch lbs.).
2.3.
Install the oil cooler hose bracket bolt (1).
Tighten the bolt to 25 Nm (18 ft. lbs.).