K 1500 Suburban 4WD V8-4.8L VIN V (2003)
1. Install the exhaust heat shield (1,3) to the dash panel studs.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the exhaust heat shield nuts.
Tighten the nuts to 9 Nm (80 inch lbs.).
3. Install the engine shield and bolts, if necessary.
Tighten the bolts to 20 Nm (15 ft. lbs.).
4. Lower the vehicle.
