K 1500 Suburban 4WD V8-4.8L VIN V (2003)
7. Install the vent hose swivel clip to the rear brake crossover pipe.
8. Install the rear axle vent hose to the rear axle, if necessary.
9. If vehicle is equipped with RPO Z55, install the left and right sensor link rods to the sensors.
10. Using J38185 install the link rods to the ball studs on the sensor levers.
11. If vehicle is equipped with RPO Z55, connect the following left side chassis harness electrical connectors:
-
Electronic suspension rear position sensor (1)
-
Rear shock (2)
