K 1500 Suburban 4WD V8-4.8L VIN V (2003)
2. Install the evaporator tube nut to the condenser.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
3. Install the grille to the vehicle.
4. Install the right park/turn signal lamp.
5. Connect the evaporator tube to the auxiliary A/C tube using new sealing washers, if equipped.
6. Install the evaporator tube nut to the auxiliary A/C tube, if equipped.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
7. Install the evaporator tube to the evaporator.
8. Install the evaporator tube nut to the evaporator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
9. Evacuate and recharge the system.
10. Leak test the fittings of the components using the J 39400-A.
