K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Crankshaft Position Sensor (CKP)
INSTALLATION PROCEDURE
1. Install the CKP sensor.
NOTE: Refer to Fastener Notice in Service Precautions See: Service Precautions/Vehicle Damage Warnings/Fastener Notice.
2. Install the CKP sensor bolt.
Tighten
Tighten the bolt to .................................25 N.m (18 lb ft).
3. Connect the CKP sensor electrical connector.
4. Install the starter.
5. Perform the CKP system variation learn procedure. See: Testing and Inspection/Programming and Relearning
