chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Evaporative Emissions Hose|Service and Repair > < Emissions - SES Lamp ON/DTC P0446 (EVAP) Set|Page 10406
Page 1
background image

Evaporative Emissions Hose: Service Precautions

NYLON FUEL PIPES

CAUTION: In order to reduce the risk of fire and personal injury observe the following items:

*

Replace all nylon fuel pipes that are nicked, scratched or damaged during installation, do not attempt to repair the sections of the nylon
fuel pipes

*

Do not hammer directly on the fuel harness body clips when installing new fuel pipes. Damage to the nylon pipes may result in a fuel leak.

*

Always cover nylon vapor pipes with a wet towel before using a torch near them. Also, never expose the vehicle to temperatures higher
than 115°C (239°F) for more than one hour, or more than 90°C (194°F) for any extended period. 

*

Apply a few drops of clean engine oil to the male pipe ends before connecting fuel pipe fittings. This will ensure proper reconnection and
prevent a possible fuel leak. (During normal operation, the O-rings located in the female connector will swell and may prevent proper
reconnection if not lubricated.)

Evaporative Emissions Hose|Service and Repair > < Emissions - SES Lamp ON/DTC P0446 (EVAP) Set|Page 10406