chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Positive, Battery Cable > < Battery Negative Cable Disconnect/Connect Procedure|Page 15658
Page 4
background image

12. If equipped, connect the accessory power fuse block front wiring harness electrical connector to the negative cable connector.

13. Install the battery cable bracket and bolt to the power steering pump.

Tighten
Tighten the bolt to 25 N.m (18 lb ft).

14. Connect the negative battery cable.

Positive, Battery Cable > < Battery Negative Cable Disconnect/Connect Procedure|Page 15658