K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Positive: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Unsnap the positive battery cable cap.
3. Disconnect the positive battery cable.
4. Loosen the positive battery cable bolt at the underhood bussed electrical center (UBEC).
IMPORTANT: The bolt is integral to the battery cable and is not removable.
5. If necessary, remove the engine sight shield.
6. Unsnap the junction block cover.
7. Remove the positive battery cable (1) from the junction block.
