K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Generator: Service and Repair
Generator Cable Replacement
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. If necessary, remove the engine sight shield.
3. Remove the generator cable from the generator, perform the following:
3.1.
Reposition the boot to expose the stud.
3.2.
Remove the generator cable nut.
3.3.
Remove the generator cable from the stud.
4. Open the positive cable junction block.
5. Remove the generator cable nut.
6. Remove the generator cable (2) from the junction block.
INSTALLATION PROCEDURE
