K 1500 Suburban 4WD V8-4.8L VIN V (2003)
an SIR system malfunction.
5. Remove the connector position assurance (CPA) (1) from the steering wheel module yellow 4-way connector (2) located left of the steering
column near the knee bolster.
6. Disconnect the steering wheel module yellow 4-way connector (2).
7. Remove the CPA from the I/P module yellow 4-way connector (1) located behind the I/P support.
8. Disconnect the I/P module yellow 4-way connector (1).
9. Remove the CPA from the RF side impact module yellow 2-way connector (1) located under the passenger seat.
10. Disconnect the RF side impact module yellow 2-way connector (1).
