K 1500 Suburban 4WD V8-4.8L VIN V (2003)
2. Using the J 44665-2 (2) tighten the inner tie rod (1).
Tighten
Tighten the inner tie rod to 100 N.m (74 lb ft).
3. Install the inner tie rod support clamp to the steering gear. Use the J 44665-1 (1) and the J 44665-2 (2) in order to tighten the inner tie rod support
clamp.
Tighten
Tighten the inner tie rod support clamp to 25 N.m (18 lb ft).
4. Install the rack and pinion boot to the steering gear.
5. Install the tire and wheel.
6. Lower the vehicle.
7. Perform a four wheel alignment. Refer to Measuring Wheel Alignment (With Rear Wheel Steering) Measuring Wheel Alignment (Without Rear
Wheel Steering) in Wheel Alignment.
