chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Suspension|Page 17456 > < Engine Front Crossmember Replacement (4WD)|Page 17451
Page 1
background image

Front Steering Knuckle: Service and Repair
Front Suspension

Coil Spring Suspension

COIL SPRING SUSPENSION

-

J 43631 Ball Joint Remover

-

J 45851 Ball Joint Separator Protector Adapters

REMOVAL PROCEDURE

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.

3. Support the lower control arm with a suitable jack.
4. Remove the wheel hub and bearing.
5. Disconnect the Electronic Suspension Control (ESC) link rod from the sensor, if equipped.
6. Disconnect the outer tie rod from the knuckle.

7. Remove the brake hose bracket retaining bolt from the knuckle.

Front Suspension|Page 17456 > < Engine Front Crossmember Replacement (4WD)|Page 17451