chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Position Sensor Replacement - Electronic Suspension|Page 17492 > < Front Position Sensor Replacement - Electronic Suspension|Page 17490
Page 2
background image

3. Close the bracket around the upper control arm making sure the bracket rests between the locating stops.
4. Install the bolt.

Tighten
Tighten the bolt to 25 N.m (18 lb ft).

5. Connect the sensor harness connector to the vehicle harness connector.
6. Install the wheel and tire assembly to the vehicle.
7. Lower the vehicle.

Front Position Sensor Replacement - Electronic Suspension|Page 17492 > < Front Position Sensor Replacement - Electronic Suspension|Page 17490