K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Pressure Regulating Solenoid: Description and Operation
4L60-E/4L65-E
4L60-E/4L65-E
Transmission Pressure Control Solenoid
The transmission pressure control solenoid is an electronic pressure regulator that controls pressure based on the current flow through its coil winding.
The magnetic field produced by the coil moves the solenoid's internal valve which varies pressure to the pressure regulator valve.
The PCM controls the pressure control solenoid by commanding current between 0.1 and 1.1 amps. This changes the duty cycle of the solenoid, which
can range between 5 percent and 95 percent - typically less than 60 percent. High amperage (1.1 amps) corresponds to minimum line pressure, and low
amperage (0.1 amp) corresponds to maximum line pressure - if the solenoid loses power, the transmission defaults to maximum line pressure.
The PCM commands the line pressure values, using inputs such as engine speed and throttle position sensor voltage.
The pressure control solenoid takes the place of the throttle valve or the vacuum modulator that was used on past model transmissions.
