K 1500 Suburban 4WD V8-4.8L VIN V (2003)
8. Connect the internal wiring harness electrical connectors to the following components:
-
Transmission fluid pressure switch (1)
-
1-2 shift control solenoid (2)
-
2-3 shift control solenoid (3)
-
Pressure control solenoid (4)
-
TCC PWM solenoid (5)
-
3-2 control solenoid (6)
9. Install the 1-2 accumulator.
10. Connect the transmission harness 20-way connector (1) to the transmission pass-through connector.
Align the arrows on each half of the connector and insert straight down.
11. Install the transmission filter.
