K 1500 Suburban 4WD V8-4.8L VIN V (2003)
1. Install the transmission mount to the vehicle.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the transmission mount to the transmission or transfer case adapter mounting bolts (1).
-
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Lower the transmission.
4. Install the transmission mount to the transmission support retaining nut or nuts.
-
Tighten the nut or nuts to 40 Nm (30 ft. lbs.).
5. Remove the transmission jack.
6. Lower the vehicle.
