K 1500 Suburban 4WD V8-4.8L VIN V (2003)
Important: Do not reuse the rear axle housing cover bolts.
2. Install the new rear axle housing cover bolts (1).
Tighten the bolts to 40 Nm (30 ft. lbs.).
3. Fill the rear axle. Use the proper fluid.
4. Install the rear axle fill plug.
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
5. Lower the vehicle.
Lubricant Replacement - Rear Drive Axle (9.5, 10.5 Inch Axle)
Lubricant Replacement - Rear Drive Axle (9.5, 10.5 Inch Axle)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear axle fill plug (1).
