K 1500 Suburban 4WD V8-4.8L VIN V (2003)
9. Insert the J33049 into the axle tube and through the axle shaft seal.
10. While holding the expander assembly nut. turn the driving bar clockwise until the expanding driver is snug against the axle shaft seal.
11. Drive out the seal using the J33049 and a hammer.
Installation Procedure
1. Assemble the drive bar extension onto the drive bar of J33049.
2. Insert the J33049 into the opposite side axle shaft tube.
3. Install the J45177 onto the J33049.
4. Insert the axle shaft seal into the axle tube.
5. Install the J45177 (1) and the J33049 (2) over the axle shaft seal.
6. Drive the axle shaft seal into the axle tube using the J45177, the J33049 and a hammer.
7. Install the differential assembly.
8. Install the axle shafts.
9. Install the tire and wheel assembly.
10. Lower the vehicle.
