K 1500 Suburban 4WD V8-4.8L VIN V (2003)
6. Install the pinion into the pinion gear bearing retainer.
7. Install the outer pinion bearing onto the pinion.
8. Install a new pinion oil seal using the J44414.
9. Apply sealant, GM P/N 12346004 (Canadian P/N 10953480) or equivalent, to the splines of the pinion yoke.
10. Install the pinion yoke.
Align the marks made during removal.
Notice: Refer to Pinion Flange/Yoke Installation Notice in Service Precautions.
11. Seat the pinion yoke onto the pinion shaft by tapping it with a soft-faced hammer until a few pinion shaft threads show through the yoke.
12. Install the washer and a new pinion nut
13. Install the J8614-01 onto the pinion yoke as shown.
