K 1500 Suburban 4WD V8-4.8L VIN V (2003)
19. Check the CV joint assembly for unusual wear, cracks, or other damage.
20. Replace any damaged parts.
21. Clean the halfshaft bar. Use a wire brush to remove any rust in the seal mounting area (grooves).
Assembly Procedure
1. Inspect all of the parts for unusual wear, cracks, or other damage. Replace the CV joint assembly it necessary.
2. Put a light coat of the recommended grease on the inner (6) and the outer race (8) grooves.
3. Hold the inner race (1) at 90 degrees to the centerline of the cage (2).
4. Align the lands of the inner race (1) with the windows of the cage (2).
5. Insert the inner race (1) into the cage (2), by rotating the inner race (1) downward.
6. Insert the cage (4) and inner race into the outer race (1).
