K 1500 Suburban 4WD V8-4.8L VIN V (2003)
3. Install the 1-2 and 2-3 shift solenoids.
4. Install the 1-2 and 2-3 shift solenoid retainers.
5. Install the pressure control solenoid. Ensure that the electrical tabs are facing outboard.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
6. Install the pressure control solenoid retainer and bolt.
-
Tighten the bolt to 11 Nm (97 inch lbs.).
7. Connect the internal wiring harness electrical connectors to the following components:
-
Transmission fluid pressure switch (1)
-
1-2 shift control solenoid (2)
-
2-3 shift control solenoid (3)
