chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Window Switch Replacement - Rear Door|Page 31731 > < Power Window Switch Replacement - Rear Door|Page 31729
Page 3
background image

3. Install the screw that retains the switch panel bezel (1) to the front door panel.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screw to 2 N.m (18 lb in).

4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) (Remote Procedure) Service

Programming System (SPS) (Pass-Thru Procedure) Service Programming System (SPS) (Off Board Remote Procedure)Service Programming
System (SPS) (Off Board Pass-Thru Procedure) in Programming.

Power Window Switch Replacement - Rear Door|Page 31731 > < Power Window Switch Replacement - Rear Door|Page 31729