chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
All Other Service Bulletins for Ignition Switch Lock Cylinder: > < Starting - Revised Procedures for Inop Ignition Cylinder|Page 8758

K 1500 Suburban 4WD V8-454 7.4L VIN N TBI (1995)

Page 1
background image

Position Sensor/Switch: Service and Repair

Remove or Disconnect

1. Skid plate (if equipped). 
2. Electrical connector from the indicator switch located on the upper right side of the differential.
3. Indicator switch (11).

Install or Connect

1. Indicator switch (11).

-

Coat the switch thread with sealer (GM P/N 1052942) or equivalent.

2. Electrical connector.
3. Skid plate (if equipped). 

All Other Service Bulletins for Ignition Switch Lock Cylinder: > < Starting - Revised Procedures for Inop Ignition Cylinder|Page 8758