K 1500 Suburban 4WD V8-5.3L VIN T (2002)
8. Remove the lumbar actuator (5).
9. Unclip the seat trim cover from the seat cushion frame.
10. Using a side motion, carefully separate the seat cushion trim cover from the seat cushion pad.
11. Remove the pad from the seat cushion frame.
12. Remove the seat cushion heater element, if equipped.
Installation Procedure
1. Install the seat cushion heater element, if equipped.
2. Install the seat cushion pad to the seat cushion frame.
3. Using a side motion, carefully pull the seat cushion cover onto the frame pad.
