K 1500 Suburban 4WD V8-5.3L VIN T (2002)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the pressure accumulator switch to the BPMV.
Tighten the pressure accumulator switch to 3 Nm (30 inch lbs.).
2. Connect the electrical connector to the pressure accumulator switch.
3. Install the Brake Pressure Modulator Valve (BPMV) (1) and the bolts (2) to the mounting bracket (3).
Tighten the bolts to 9 Nm (7 ft. lbs.).
4. Lower the vehicle.
