chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Air Flow Control Box - Heater|Page 11345 > < Air Flow Control Box - Heater|Page 11343
Page 2
background image

6. Remove the nuts (2) from the studs (1) that secure the auxiliary HVAC module to the underside of the vehicle.
7. Remove the safety stands.
8. Lower the vehicle.

9. Remove the right rear quarter trim panel.

10. Remove the electronic suspension control module.
11. Disconnect the electrical connectors from the auxiliary HVAC module.
12. Remove the fastener (5) for the upper auxiliary air duct (6). Carefully slide the duct up, into the headliner, until the bottom edge of the duct is

above the air distributor duct.

Air Flow Control Box - Heater|Page 11345 > < Air Flow Control Box - Heater|Page 11343