K 1500 Suburban 4WD V8-5.3L VIN T (2002)
Power Steering Pump: Service and Repair
Power Steering Pulley Replacement
Power Steering Pulley Replacement
Tools Required
^
J25034-C Power Steering Pump Pulley Remover
^
J25033-C Power Steering Pump Pulley Installer
Removal Procedure
1. Remove the upper fan shroud.
2. Remove the drive belt.
3. Remove the power steering pump pulley using the J25034-C.
Installation Procedure
1. Place the power steering pump pulley on the end of the power steering pump shaft.
2. Install the power steering pump pulley using J25033-C.
3. Ensure that the power steering pump pulley is flush against the power steering pump shaft, with an allowable variance of 0.25 mm (0.010 inch).