K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
Antenna Cable: Service and Repair
Coaxial Cable Replacement - Digital Radio (Extension)
REMOVAL PROCEDURE
1. Remove the upper trim panel from the Instrument Panel (IP).
2. Disconnect the digital radio antenna cable (1).
3. Fully open the IP storage compartment in order to access the digital receiver (3).
4. Disconnect the antenna cable (2) from the digital receiver (3).
5. Disengage the antenna cable clips (4, 6) from the IP.
6. Remove the digital radio antenna extension cable (5).
INSTALLATION PROCEDURE
1. Install the digital radio extension cable (5) to the IP.
2. Engage the antenna cable clips (4, 6) to the IP.
3. Connect the antenna cable (2) to the digital receiver (3).
