K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
Front Bumper Reinforcement: Service and Repair
Brace Replacement - Front Bumper (Avalanche)
Brace Replacement - Front Bumper (Avalanche)
Removal Procedure
1. Remove the brace bolt (2) from the front bumper fascia.
2. Remove the brace bolt (3) from the outboard mounting brace plate.
3. Remove the brace (1) from the vehicle.
Installation Procedure
1. Install the brace (1) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 bolts that retain the brace to the fascia and the outboard brace plate.
*
Tighten the front bumper fascia brace bolt (2) to 15 N.m (11 lb ft).
*
Tighten the front bumper outboard brace plate bolt (3) to 9 N.m (80 lb in).
