K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
9. Install the park brake cable (2) to the lever (1).
10. Perform the following procedure to install the cable (2) to the backing plate (4):
10.1.
Compress the spring (3) by pushing towards the lever (1).
10.2.
Route the cable (2) through the slot in the backing plate.
10.3.
Push the cable housing into the backing plate (4) until the locking tabs snap into place.
11. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
12. Remove the safety stands.
13. Lower the vehicle.
14. Install the park brake cable to the equalizer by pulling down on the park brake cable in front of the equalizer then installing the cable to the
equalizer bar.
15. Adjust the park brake cable. Refer to Park Brake Adjustment .
