K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
5. Remove the connector position assurance (CPA) from the I/P module yellow 4-way connector (1) located behind the I/P support.
6. Disconnect the I/P module yellow 4-way connector (1).
Zone 6
1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
IMPORTANT: Refer to SIR Service Precautions before disabling the SIR system.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Remove the SIR fuse from the fuse block.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.
5. Remove the RF door trim panel.
6. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the bottom right of the
door (4).
7. Disconnect the side impact sensor yellow 2-way connector (5).
Zone 7
1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
IMPORTANT: Refer to SIR Service Precautions before disabling the SIR system.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Remove the SIR fuse from the fuse block.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
