K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
INSTALLATION PROCEDURE
1. Install the module wiring harness (2) to the seat frame (3) while guiding the wiring harness through the appropriate spots on the seat frame.
2. Install the wiring harness retaining clips to the seat frame.
3. Install the side impact module (1) to the seat frame.
4. Install the side impact module retainer.
5. Install the retaining bolts (3) to the side impact module.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
6. Install the seat back cover.
7. Install the front seat.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 and SIR Disabling and Enabling Zone 9.