K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
7. If equipped with a 8.1L engine, remove the negative cable clip from the positive cable clip.
8. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
9. Remove the engine wiring harness ground/negative cable bolt.
10. Reposition the wiring harness ground and negative cables.
11. Remove the forward lamp wiring harness ground/negative cable bolt.
12. Remove the negative battery cable.
INSTALLATION PROCEDURE
1. Install the negative battery cable.
2. Position the negative cable and forward lamp wiring harness ring terminals to the frame. Insert the anti-rotation tab on the forward lamp wiring
