K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. If equipped with a 8.1L engine, install the positive battery cable.
2. Install the positive cable to the engine harness clip.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the positive cable clip bolt (3).
Tighten
Tighten the bolt to 8 N.m (71 lb in).
4. Install the positive cable (1) to the starter.
5. Install the positive cable nut (2).
Tighten
Tighten the nut to 9 N.m (80 lb in).
6. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the positive battery cable.
7. Install the positive cable to the clip on the oil pan.
8. Install the positive cable clip to the clip on the oil pan.
9. Install the positive cable to the starter.
10. Install the positive cable nut (1).
Tighten
Tighten the nut to 9 N.m (80 lb in).
