K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
3. Install the relay rod (9) to the idler arm ball stud (1).
Ensure the seal is on the stud.
4. Use the J 29193 in order to seat the tapers.
Tighten
Tighten the J 29193 or the J 29194 to 54 N.m (40 lb ft) in order to seat the tapers.
5. Install the new idler arm ball stud prevailing torque nut to the idler arm ball stud.
Tighten
Tighten the nut to 62 N.m (46 lb ft).
6. Install the engine protection shield, if equipped.
7. Lower the vehicle.
8. Check the wheel alignment. Refer to Measuring Wheel Alignment (With Rear Wheel Steering) Measuring Wheel Alignment (Without Rear Wheel
Steering) in Wheel Alignment.
