K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
Pinion Bearing: Service and Repair
Drive Pinion Bearings Replacement (10.5 Inch Axle)
Drive Pinion Bearings Replacement (10.5 Inch Axle)
Tools Required
^
J22388 Pinion Oil Seal Installer-Rear
^
J22761 Differential Side Bearing Installer
^
J22912-01 Split Plate Bearing Puller
^
J24433 Pinion Cone and Side Bearing Installer
^
J37624 Pinion Bearing Installer
^
J8092 Universal Driver Handle - 3/4 inch - 10
^
J8608 Rear Pinion Bearing Installer
^
J8614-01 Flange and Pulley Holding Tool
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the differential assembly.
3. Remove the pinion gear bearing retainer.
4. Remove the pinion yoke and the oil seal.
5. Remove the outer pinion bearing.
6. Remove the pinion.
7. Remove the collapsible spacer.
